Skip to Content

Atlas Headrest - Embody Black

The Atlas Headrest for the Embody Chair fills the one gap Herman Miller left open. Crafted in the USA with premium materials matched to the Embody's black finish, it transforms your reclining experience with dynamic, posture-led neck support designed to move with you — not just hold your head in place.

Atlas
130,000.00 ₸ 130,000.00 ₸

Terms and Conditions
Returns: 14-day money-back guarantee
Warranty: 12 year Warranty on Herman-Miller Products
Shipping: 1-3 Business days via DPD

DEPTH ADJUSTMENT

Up to 12.7

VERTICAL ADJUSTMENT

Up to 24.3 cm

COMPATIBILITY

All Herman Miller Embody chairs — all fabric versions


WARRANTY

12-year Herman Miller Embody Warranty

Dimensions & adjustability

Lowest height10.2 cm above chair frame
Highest height34.3 cm above chair frame
Vertical travelApprox. 24.1 cm / 9.5"
Depth — retracted7.6 cm from chair frame
Depth — extended20.3 cm from chair frame
Depth travel12.7 cm / 5.0"
Tilt adjustmentIndependent rotational range — all recline angles

Compatibility & build

Chair compatibilityHerman Miller Embody — all versions
Fabric optionsRhythm · Sync · Medley
Frame optionsGraphite · White
Does not fitAeron, Cosm & other HM chairs
Warranty impactDoes not void Embody warranty
Frame constructionAluminium frame with polymer components
FinishBlack — matched to Embody hardware
ManufacturingMade in Michigan, USA

Installation & ergonomics

Tools requiredNone — tool-free installation
Installation timeApprox. 10–15 minutes
MountingAttaches to Embody backframe
Adjustment axesHeight · Depth · Tilt
RemovableYes — fully reversible, no marks
Support philosophyDynamic — designed for regular repositioning
Neck support zoneBase of cranium / cervical curve
Headphone useCompatible with over-ear headphones
Posture integrationExtends PostureFit®, BackFit™ & Pixelated Support™

Extended focus work

Adjustable from seated position without breaking concentration

Recline & recovery

Supports the head during full Embody recline motion

Video calls

Natural head positioning on camera — upright or reclined

Neck & cervical support

Completes the Embody's full spinal support system

The Atlas Headrest for Herman Miller Embody was designed to extend ergonomic coverage to the cervical spine — the one gap in the Embody's otherwise complete postural system. Built in Michigan using the same supply-chain materials as Herman Miller's own production, it integrates visually and ergonomically with the Embody Chair while encouraging healthy dynamic movement through independent height, depth, and tilt adjustment — all tool-free from a seated position.

Care instructions

Fabric upholstery (Rhythm / Sync / Medley)

Vacuum regularly with a soft brush attachment. For spot cleaning, apply a mild soap solution with a clean damp cloth — blot gently, do not scrub. Allow to air dry fully. Do not machine wash, steam clean, or expose to direct heat.

Frame & adjustment mechanisms

Wipe aluminium and polymer surfaces with a dry or slightly damp microfiber cloth. Avoid abrasive cleaners, solvents, and bleach. Check that all three adjustment axes engage smoothly during regular use.

General maintenance

Confirm the mounting bracket is secure after each height or depth adjustment. The headrest removes and reinstalls without tools and leaves no permanent marks on the Embody Chair.

Build & sourcing

Michigan-made

Designed, engineered, and manufactured in Michigan, USA — the same region as Herman Miller's production facilities — under strict quality control standards.

Herman Miller supply-chain materials

Fabric, polymers, and structural components are sourced from Herman Miller's long-term suppliers, ensuring an exact match in colour, texture, and durability — not an approximation.

Embody warranty preserved

Installation causes no permanent modification to the chair. The Herman Miller 12-year, 3-shift warranty on the Embody Chair remains fully intact after fitting.

Shipping

Delivery regionKazakhstan & CIS region
Lead timeConfirmed at time of order
InstallationProfessional installation available in Almaty
ShowroomAvailable to trial in Almaty showroom
Authenticity100% genuine Atlas Headrest product

Installation & setup

Tools requiredNone
Installation timeApprox. 10–15 minutes
Included componentsAll mounting hardware included
Adjustment axesHeight · Depth · Tilt
RemovableFully reversible — no modifications to chair
Chair warrantyEmbody warranty remains fully intact
Local supportServiced locally in Kazakhstan

Габариты и регулировка

Мин. высота10,2 см над рамой кресла
Макс. высота34,3 см над рамой кресла
Диапазон по высоте≈ 24,1 см / 9,5"
Глубина (мин.)7,6 см от рамы кресла
Глубина (макс.)20,3 см от рамы кресла
Диапазон по глубине12,7 см / 5,0"
НаклонНезависимая ротация под любой угол откидывания

Совместимость и конструкция

СовместимостьHerman Miller Embody — все версии
Варианты обивкиRhythm · Sync · Medley
Цвет каркасаGraphite (графит) · White (белый)
Не подходитAeron, Cosm и другие кресла HM
Влияние на гарантиюГарантия Embody не аннулируется
Конструкция рамыАлюминий и полимерные компоненты
ОтделкаЧёрный — в тон фурнитуре Embody
ПроизводствоМичиган, США

Установка и эргономика

ИнструментыНе требуются
Время установки≈ 10–15 минут
КреплениеК раме спинки Embody
Оси регулировкиВысота · Глубина · Наклон
СъёмностьДа — полностью обратимо
Концепция поддержкиДинамическая — рассчитана на регулярное перемещение
Зона поддержкиОснование черепа / шейный изгиб
НаушникиСовместимо с накладными наушниками
Интеграция с EmbodyДополняет PostureFit®, BackFit™ и Pixelated Support™

Длительная сосредоточенная работа

Регулировка без инструментов из положения сидя — не отвлекаясь от задачи

Откидывание и восстановление

Поддерживает голову при полном откидывании кресла Embody

Видеозвонки

Естественное положение головы в кадре — сидя прямо или откинувшись

Поддержка шеи

Завершает систему поддержки позвоночника кресла Embody

Подголовник Atlas для Herman Miller Embody разработан для того, чтобы распространить эргономическую поддержку на шейный отдел позвоночника и завершить систему посадки Embody. Произведён в Мичигане из тех же материалов, что и сам Herman Miller Embody, подголовник органично вписывается в эстетику кресла и поддерживает здоровое динамичное движение — с независимой регулировкой высоты, глубины и наклона.

Инструкции по уходу

Обивка (Rhythm / Sync / Medley)

Регулярно пылесосьте мягкой насадкой-щёткой. Локальные загрязнения удаляйте мягким мыльным раствором и влажной тканью — промокайте, не трите. Дайте высохнуть естественным образом. Не стирать в машине, не обрабатывать паром и горячим воздухом.

Рама и механизмы регулировки

Протирайте алюминиевые и полимерные поверхности сухой микрофиброй. При необходимости — слегка влажной. Не использовать абразивные средства, растворители и отбеливатели. Периодически проверяйте плавность работы всех трёх осей регулировки.

Общее обслуживание

После каждой регулировки высоты или глубины убедитесь, что крепёжный кронштейн зафиксирован. Подголовник снимается и устанавливается без инструментов и не оставляет следов на кресле.

Производство и материалы

Производство в Мичигане, США

Подголовник полностью разработан, спроектирован и произведён в Мичигане, США — в том же регионе, что и производство Herman Miller.

Материалы из цепочки поставок Herman Miller

Обивка, полимерные компоненты и конструктивные элементы поставляются от долгосрочных поставщиков Herman Miller — обеспечивая точное совпадение цвета, текстуры и долговечности.

Гарантия Embody сохраняется

Установка подголовника не вносит необратимых изменений в кресло. 12-летняя гарантия Herman Miller на кресло Embody остаётся в полной силе.

Доставка

Регион доставки Казахстан и страны СНГ
Срок поставки Уточняется при заказе
Установка Профессиональная установка доступна в Алматы
Шоурум Доступно для тестирования в Алматы
Подлинность 100% оригинальный продукт Atlas Headrest

Сборка и гарантия

Инструменты Не требуются
Время установки ≈ 10–15 минут
Комплектация Всё крепёжное оборудование включено
Оси регулировки Высота · Глубина · Наклон
Съёмность Полностью обратимо — без изменений кресла
Гарантия кресла Гарантия Embody остаётся в силе
Поддержка Локальная сервисная поддержка в Казахстане

12-year Warranty.

Backed locally.

Adding the Atlas Headrest to your Embody Chair does not void or affect your Herman Miller 12-year, 3-shift warranty in any way. Every Embody Chair sold by Office Design is backed by Herman Miller's official warranty, and every Atlas Headrest is supported locally by our team in Almaty for customers across Kazakhstan and the CIS region.

EMBODY PIXELATED SUPPORT™ & BACK MECHANISM

12 years

ATLAS FABRIC HEADREST SURFACE. MOUNTING BRACKET & FRAME

Covered by Atlas

EMBODY FRAME & STRUCTURAL COMPONENTS 

12 years

EMBODY WARRANTY IMPACT  

None — headrest does not void HM warranty

EMBODY TILT SYSTEM & BACKFIT™ ADJUSTMENT 

12 years

PROFESSIONAL SUPPORT

Available across Kazakhstan & the CIS region


Customers testimonials

What our customers are saying about us.

Rating

"A great company with quality furniture and comfortable chairs for work and home. Delivery and installation were on time and without any problems!!! THANK YOU"

Anvar Nurbaev
Google Review
Rating

"I bought a chair from you. I really liked it. It's high quality, comfortable, and at a reasonable price. Thank you!"

Асем Айткалиева
Google Review
Rating

"High-quality furniture. The guys helped me set up my office, and I'm very happy with the results! I highly recommend them."

Алексей Щетинин
Google Review

—— QUESTIONS

Everything you might ask before buying.

No. The Atlas Headrest attaches to the Embody backframe using included hardware and causes no permanent modification to the chair's frame, mechanisms, or upholstery. Herman Miller's 12-year, 3-shift warranty on the Embody Chair remains fully intact. Atlas has designed the product specifically to ensure this, and states so explicitly.

The Atlas Headrest for Embody is available in three Embody fabric types: Rhythm, Sync, and Medley — each in the colour options offered by Herman Miller for that fabric. The Black Rhythm and Black Sync variants are the ones relevant to this listing. Note that Balance fabric is not currently available as an Atlas Headrest option. To identify your Embody's fabric type, look for the manufacturer label under the rounded cap on the rear of the backrest — the bolded FABRIC code will tell you both the fabric type and the colour.

Look at the plastic spine running up the centre of the backrest and the arm structures. A Graphite frame is matte black; a White frame is bright white polymer. Ensure you select the matching frame colour when ordering, as the Atlas headrest bracket is colour-matched to both options.

Most headrests are designed to hold a single locked position. The Atlas is designed around the opposite philosophy: it is meant to be repositioned regularly, from a fully seated position, without tools. Atlas's own guidance is to get used to adjusting the headrest throughout the day — because healthy sitting is dynamic sitting, and the headrest should move as your posture changes. This aligns directly with the Embody Chair's own design philosophy, which encourages continuous micro-movement rather than locking into a fixed position.

The Atlas Headrest for Embody adjusts on three independent axes. Vertically, the top of the headrest can travel from 10.2 cm (4") above the chair frame up to 34.3 cm (13.5") — a total of approximately 24 cm of height travel, accommodating a very wide range of user heights. Depth adjusts from 7.6 cm (3") to 20.3 cm (8") in front of the chair frame — 12.7 cm (5") of total travel. Tilt offers a wide rotational range to align the headrest surface with any recline angle or upright posture. All adjustments are tool-free and can be made from a seated position.

Yes. The Atlas Headrest's wide support surface is designed to sit behind the head without interfering with over-ear headphones, making it comfortable for gaming, conferencing, and any extended session where headphones are worn.

Installation is tool-free and typically takes between 10 and 15 minutes. All required mounting hardware and instructions are included in the box. The headrest can be removed and reinstalled just as quickly, and leaves no permanent marks on the Embody Chair.

Yes — the Atlas Headrest is available fitted to the Embody display chair in our Almaty showroom. We strongly recommend trying it in person to experience the adjustment range and fit before ordering, particularly if you want to confirm the fabric and frame colour match to your own chair.

Yes. Delivery is available across Kazakhstan and the CIS region, with professional installation available in Almaty.